Additive Industries largest aerospace customer expands installed base to 10 before the year-end

Additive Industries North America, Inc. is proud to announce the purchase of 6 MetalFAB1 systems by a prestigious aerospace company located in California. This firm order validates the Additive Industries’ concept of production-based metal powder bed fusion systems for maximumoverall equipment efficiency. When the order for six machines arrives at the customer site later this year, it will bring the installed base of MetalFAB1 systems to 10 with more possible in 2020. This customer was able to consolidate approximately 700 kilogramsof powder in the month of June with the 4 laser MetalFAB1 systems currently in operation. Theapplication represents an inflection point in metal powder bed fusion part production where candidate parts were typically limited to fist size volumes to meet ROI calculations. With the MetalFAB1 systems this customer is able to cost effectively produce over 420 [mm]diameter by 400 [mm]tall parts weighing a whopping 180 kilograms.

“This part is likely the largest, most complex powder bed fusion part ever produced in series production. We are proud of our multi-disciplinary team that worked with this customer to make this production a reality as well as the capabilities of our MetalFAB1 systemsto print for days back to back”, said Shane Collins, General Manager for Additive Industries North America, Inc.“This order willbring the North America MetalFAB1 installed base to 17 systems which has been achieved since machine #1 was installed late in 2017. Consideringeach system has four, 500[W]lasers, the powder consolidation capabilities would equal roughly 68 single lasersystems”, he added. “The fast growth in North America is partly due to our focus on the aerospace sector and the aeronautics adoption curve for production additive manufacturing. We expect this growth to further accelerate when our customers publicly release their applications and more companies are able to visualize the large, complex parts that can be manufactured on the MetalFAB1 system in titanium, aluminium, steel and nickelbasedalloys”, added Daan Kersten, CEO of Additive Industries.