3D PRINT CONGRESS & EXHIBITION
JUNE 5.6.7, 2018 – LYON EUREXPO – FRANCE
Launched in 2014, 3D Print enhances its international standing, for 2018 !
In 4 years it has become the benchmark event and favourite get-together for all those involved in additive manufacturing in France.
Be part in 3D PRINT, the largest professional additive manufacturing event in France !
Over 3 days, this event will as ever make the most of the massive presence of key stakeholders from major international corporations and start-ups alike, all with a stake in additive manufacturing. More tahn 200 exhibitors expected for 2018
A true factory will be on show, with machines and equipment in operation, for a totally immersive experience of 3D printing.
As for the Congress, in simultaneous translation it will present personalities, research centres and organisations from leading countries in 3D printing, and deliver a global vision reflecting the issues surrounding these technologies.
WHO VISIT THE SHOW :
A dense and qualified visitorship from various market: aeronautics, automotive, health & medical, building & construction, electronic-computing-telecommunication, jewelry, sport-leisure , cosmetics & perfumery, home appliances, food industry, toys
3D Print Congress & Exhibition targets, as before, two levels of participants on a mix-and-match basis: ultra-specialists in additive manufacturing intending to bring their knowledge up-to-date, and manufacturers who are starting to take an interest in these technologies with a view to possibly exploiting them.
The NORDIC3DEXPO exhibition, the Original Exhibition of 3D printing and 3D technologies,
is the first exhibition of its kind in Scandinavia and Northern Europe to focus on 3D printing and 3D technologies.
The exhibition began in spring 2016, when it took place for the first time at Energia Areena in Vantaa, Finland.
It immediately gained a lot of attention around the globe and gathered together over 40 exhibitors
and a few thousand 3D-printing enthusiasts worldwide from Finland, Sweden, Denmark, Lithuania, Germany and the Czech Republic.
2018 event will be held at Dipoli Conference Center in Espoo, Finland 18-19th of April.
Together at the same time and same place will also take place FIRPA’s 20th Anniversary Conference.
Under the umbrella of Aalto 3D days the conference consists of Medical and Industrial focus area days and offers presentations from worlds’ leading experts on both areas.
On top of the conference presentations there will be expert workshops and additional activities like NORDIC3DEXPO, annual 3D Printing exhibition.
The Conference is organized by an international committee.
Make sure you’ll be a part of the future growth of 3D printing in Scandinavia, the Baltics and Russia!
Book your stand for the 2018 event now!
Asiamold – Guangzhou International Mould & Die Exhibition is one of the most well-known professional business platforms in China’s mould and die industry. The fair is dedicated to creating business among Chinese and international manufactures, distributors and exporters. Covering the latest mould making, 3D printing, die casting and metalworking instruments, the show is where top executives, senior management and engineers gather to discover the latest industry innovations and potential partnerships across the region.
Beamler’s unique software unlocks the full potential of 3D printing technology for manufactures in a disruptive new way. I’m reaching out to inform you about the unique opportunity to be part of the next revolution in manufacturing through a Beamler meetup event.
During the meetup I will pitch Beamler, answer questions and look forward to hearing your thoughts. Apart from this being a great investment opportunity you have also the change to meet the team and ask them anything you would like. There is only room for 20 people at our new office so please let us know if you will come through Facebook, Eventbrite or by sending an email to me: firstname.lastname@example.org
Why invest in Beamler?
– Booming 3D printing market: from 6 billion in 2016 to 21 billion dollars by 2020
– Investments in Beamler so far: €500.000
– 7 hours 100K, 7 days 150K (100%), raising the bar to 200K
– Number of test users: 15.000
– Big manufacturers calling us with interest in our software. Every day.
If you can’t make it to our event, we can always talk. Go to www.thebeamlernumber.com
AM Ceramics 2017
The second annual “AM Ceramics” will take place on September 11th to 12th 2017 at the Falkensteiner Hotel Vienna. With regard to the high number of international experts attending, the event will be held in English.
The two-day event presents strategies for successful integration of additive manufacturing of ceramics into production processes.
Renowned speakers from well established companies like Morgan Advanced Materials, Safran Tech, Johnson Matthey and many more provide their first-hand experience from successfully applied AM applications.
In addition, an overview into current research and development trends will be exhibited.
Ceramic additive manufacturing has the potential to radically change the industry. Available additive manufacturing systems for ceramics have already reached an advanced level. They present a supplement or a tangible alternative to conventional manufacturing methods.
Learn more about the potential and the opportunities given by AM and register today for the AM Ceramics 2017.
Add it 2017 – (ADDitive manufacturing and Innovative Technologies 2017)
The 3rd edition of the Add it 2017 (Symposium on ADDitive Manufacturing and Innovative Technologies), focused on Polymers, will take place on September 28 – 29, 2017, in Steyr, AT (Museum Arbeitswelt). www.addit2017.org
Around 150 internationally recognized experts from industry and academics are expected and will present and discuss the current state of research, highlights of their technology and trends in the market.
The topics that will be covered at the Add it:
- Focus on Additive Manufacturing with Polymers
- AM for medical applications
- Material Development
- Integrated Electronics
- Micro/Nano 3D-Printing
- Training and Education for AM, “Qualifizierungsnetzwerk – Polygenferos“
Free 3D Printer Training
iMakr will be offering free 3D printing training at the iMakr Store in London.
This training is best suited for people who are looking at purchasing a 3D printer, or are just interested in the technology, and want to learn more about the machines and software.
The following points will be covered during the training session:
- Introduction to 3D printing
- Introduction to 3D design
- Setting up your 3D printer
- Maintenance and troubleshooting
If you have any question, please email us at email@example.com.
We look forward to meeting you!
The 22nd TCT Show continues to set the agenda for the industry bringing together dozens of inspirational speakers. They come together for insight, education, innovation and most importantly to do business. The mix of expert speakers, real world applications and innovations alongside product launches, live demonstrations and exciting features creates an event that bristles with energy. As a result the TCT Show attracts a highly charged crowd comprised of manufacturers, designers, business leaders, early adopters, innovators and investors to an event known worldwide for being the place where they can see tomorrow’s manufacturing technology today.
5th shanghai int’l intelligent manufacturing expo-3d printing on medical treatment&education
With the rapid development 3d printing technology, It has been applied widely in both digital medical treatment and education field.
The combination of digital medicine and clinical medicine has been more widely used in disease diagnosis, treatment, testing and preoperative planning; And gradually moves towards the personalized implants, the design and construction of 3d printing cells and tissues and organs. The advantage of its quickness, accuracy,designability and characteristics of making complex shape into entity makes it has a broad application prospect in the medical field.
Meanwhile,Combined 3D printing with VR intelligent technology which has made education become an innovation mode recently. On the basis of 3D printing, robot and VR technology, teenagers’education and training could lead them solve the problems with innovation thinking gradually. Meanwhile, it would guide children to explore the world of science and technology in practice. We believe that children’s training of this innovation will become a mainstream trend and be recognized by more and more educational institutions.
2017 5th Shanghai international intelligent exhibition and Summit will be held on August 19-21, in the Shanghai World Expo Exhibition& Convention Center,
The exhibition area is 7000 square meters. The summit will make an academic discussion about digital medicine and 3 d printing technology in the scientific research and clinical application
The exhibition will take digital medical treatment & innovation education as the theme, aim at providing a favorable platform between Technology Exchange and supply-demand cooperation and promote the wide application of 3 d printing and intelligence technology.
Paper Communication Exhibition Services
Shanghai Xun Zhan Convention & Exhibition Ltd.
Room 1005, West Building, Jinyulan Square, No. 1, Dapu Road, Shanghai.
The NORDIC3DEXPO exhibition, the Original Exhibition of 3D printing and 3D technologies, is the first exhibition of its kind in Scandinavia and Northern Europe to focus on 3D printing and 3D technologies. The exhibition began in spring 2016, when it took place for the first time at Energia Areena in Vantaa, Finland. It immediately gained a lot of attention around the globe and gathered together over 40 exhibitors and a few thousand 3D-printing enthusiasts worldwide from Finland, Sweden, Denmark, Germany and the Czech Republic. Make sure you’ll be a part of the future growth of 3D printing in Scandinavia, the Baltics and Russia!
Book your stand for the 2017 event now!