Home Software One-click positioning: Eplus3D introduces new hybrid MPBF manufacturing solution

One-click positioning: Eplus3D introduces new hybrid MPBF manufacturing solution

Recently, Eplus3D has released a new MPBF Hybrid Manufacturing Solution to improve the hybrid manufacturing process of metal 3D printing, which is featured with one-click positioning and has successfully completed the test and lead customers acceptance in March 2023. The New MPBF Hybrid Manufacturing Solution is mainly used for automatic hybrid manufacturing of parts.

The software automatically calculates the position information of the parts to be hybrid manufactured by collecting the images of the parts and obtaining the contour map of the parts, then returns the position information of the parts to the printing equipment to realize intelligent hybrid manufacturing and improve the efficiency and accuracy of parts.

For hybrid manufacturing, which in our case means the metal additive manufacturing on top of a pre-manufactured part such as a milled part, the most critical and difficult step is how to accurately position the additive layer information to the existing pre-form. The working area should completely coincide with the substrate, otherwise misalignment will occur and for example cooling channels that run through both areas of the final part won’t achieve the desired function. The misalignment of complex parts is likely to cause the parts to fail to meet the design requirements, that is, effective hybrid manufacturing with a dimensional tolerance of less than 0.1mm.

How it works

The workflow of this Hybrid Manufacturing Solution is relatively easy for even starters. Before learning how to use this software system, users are only required to have a basic understanding of powder based additive manufacturing. In the workflow, the user is guiding the software to recognize the inside and outside contours of a part on the MPBF-equipment’s operating screen. Then the printing software will automatically position the print-data at this place with a reposition accuracy of lower than 0.1mm. The system uses the same camera as Eplus3D’s active powder bed monitoring module and can therefore be integrated easily at customers that already use this function. As always, all customers are eligible of upgrading their existing systems with the Hybrid Module.

The New MPBF Hybrid Manufacturing Solution is widely used by molding, automotive, tooling industry, etc. It is of great significance for realizing the accurate positioning of the hybrid manufactured 3D printing part with the original mold and ensuring the quality of the hybrid manufactured part. The new MPBF Hybrid Manufacturing Solution has greatly reduced production costs and continuously improves the competitiveness in metal 3D printing manufacturing.

Find out more about Eplus3D at eplus3d.com.

Subscribe to our Newsletter

3DPResso is a weekly newsletter that links to the most exciting global stories from the 3D printing and additive manufacturing industry.

Privacy Policy*

You can find the privacy policy for the newsletter here. You can unsubscribe from the newsletter at any time. For further questions, you can contact us here.