A year and a half ago, we began testing the prototype of what is today referred to as the Next 1.0 Advanced Level desktop filament extruder.
Taking forward the same commitment to quality and innovation, we focused on our next experiment – working with a semi-crystalline thermoplastic with mechanical and chemical properties ideal for sustaining high temperatures. This thermoplastic is known as PEEK (Polyether Ether Ketone).
Working with PEEK has presented interesting challenges, chief among which involved extruding it in the correct temperature range, while factoring in internal pressure, and without affecting the material’s crystallinity. It has been a good start, and our first trials turned out to be easier than expected.
But first, a bit about PEEK. And its key applications.
PEEK finds its main uses in the Aerospace, Automotive and Medical industries.
Aerospace industry: Being strong, lightweight, and durable in a wide range of temperatures, PEEK is evolving into a popular choice of material in the aerospace industry. Its low price point does not hurt either.
Medical industry: 3D printing has already established itself as an invaluable asset to the medical and dental industries, bringing a whole new level of freedom and accuracy to the process of printing unique parts and components. PEEK (or PEKK for dental industry) extends the scope of 3D printing, having similar properties as the human bone, and thus being one of the few materials that the body does not resist.
Recent PEEK tests with the Next 1.0 Advanced Level desktop filament extruder
Switching from PLA to PEEK presented an unique challenge: building up the temperature inside the Advanced Level extruder to PEEK’s high melting point of 343 degrees.
We went about it in phases, using 2 cleaning compounds as transition materials. First, we slowly raised the temperature from 170 to 300 degrees with the first transition material. Once temperatures had crossed 300 degrees, we switched to the second transition material, and worked on reaching 390 degrees. This was the final stage in our trial, where we could proceed to extrude PEEK.
Because of PEEK’s steady flow and relatively quick cooling properties, extruding it to the desired thickness (2.85mm or 1.75mm) was easier than expected. Winding it on a spool was a different ballgame, though. Due to the strength of the material we had to tape the first part of the filament on the spool, so as to wind it correctly and prevent it from popping out of the spool.
Transition materials and PEEK
The transition material played a key role throughout our PEEK extrusion process. We first mixed the PEEK with the transition material, and then gradually lowered the temperature range while increasing the amount of transition material in the mix.
Image: 3devo BV – phase 1 extruding PEEK
Extruding your own PEEK – The main advantages
Buying PEEK granulate will only set you back by around 100 Euros per kg, as opposed to a filament spool that will cost you to the tune of 1000 Euros per spool.
In addition to this, you can try creating custom composites with PEEK granules, by adding in different materials such as carbon fiber.
Do you have one of our Advanced Level extruders?
Contact firstname.lastname@example.org for the profile settings to start extruding PEEK.
For more information: www.3devo.eu