Home 3D Scanner Evatronix launches eviXscan Quadro+ 3D scanner

Evatronix launches eviXscan Quadro+ 3D scanner

As 3D scanning technology evolved and customers demanded greater accuracy, the Evatronix design team created a new dual range scanner model. The Quadro+ is a completely new dual-band scanner, designed from the scratch. It replaces the highly successful previous HD Quadro dual-band scanner.

Two scanning ranges are the Quadro+’s most important universal feature. They allow both the precise measurement of small parts with very high accuracy and the rapid geometry measurement of large objects. The device’s inner range enables objects from 120 to 450 mm in size to be scanned efficiently. In case of the outer range the recommended size of the scanned objects is from 250 to 1000 mm. Changing the scanning range is done in software and no recalibration is required after changing the range. In addition, having scans from two different scopes with Quadro+, one can combine them using the latest scanner software eviXscan 3D Suite 2.8. This solution allows to significantly speed up the work of measuring objects, where certain parts require scanning at a high resolution, which is not necessary when scanning other parts of the object.

Quadro+ is equipped with four high-resolution cameras: 2×9 Mpix for the outer range and 2×12 Mpix for the inner range. The use of cameras with modern matrixes in combination with high quality lenses with low distortion level makes the scanner obtain as much as 350 ptk/mm2 in the inner range. The device has a new projector equipped with a blue LED light source in DLP technology allowing to obtain an image of 1080p resolution. The low wavelength of blue light enables better filtering of ambient noise. Thanks to a high powered LED the scanner can scan dark object in short time. The minimum scan acquisition time is now 1.2 seconds.

The exterior of the scanner has also been refreshed. The housing of the new Quadro+ is vacuum cast, which makes it significantly lighter than the aluminum housing of the previous model. This enables it to work with more robots and cobots.

All in all, the Quadro+ will satisfy the most demanding customer because it efficiently acquires measurement data of objects with a wide range of dimensions. With two built-in scanning ranges, the Quadro+ can effectively replace two separate devices with different ranges. As one can guess, purchasing one universal device is more cost-effective than purchasing two scanners with different working areas, which is worth considering when choosing equipment.

For applications where customers want to scan a part quickly with as few scans as possible, they use the outer scope. On the other hand, where there are high requirements for accuracy and resolution one can use the inner range. The ability to combine point clouds from two scopes significantly increases the range of applications for this scanner. The very high versatility of the Quadro+ makes it suitable for applications such as production lines, where it can be easily integrated with robots.

For more information, visit evixscan3d.com.

Subscribe to our Newsletter

We don’t spam! Read more in our privacy policy